Industrial Use Electromagnetic Induction Heater with Good Stability, Plastic Granulation Induction Heater

• Customization: Available
• Warranty: 1 Year
• Type: Induction Heating Machine
• Model NO.: JS1000-80
• Structure: Wall-Mounted
• Brand: Jonson
• Rated Power: 80kw
• Rated Input Current: 110-120(a)
• Heat Dissipation Mode: Air-Cooled / Water-Cooled
• Rated Voltage: 380V
• Voltage Adaptation Range: 340V~440V
• Adapt to Ambient Temperature: -20 Degrees Celsius to 50 Degrees Celsius
• Adapt to Environmental Humidity: Less Than or Equal to 95%
• Start Time: <1s
• Power Adjustment Range: 20~100%
• Transport Package: Carton
• Specification: 635mm*445mm*315mm
• Trademark: Jonson
• Origin: Guangdong Province, China
• HS Code: 8514400090
• Production Capacity: 800 Pieces / Month

Product Description

Guangdong Jiangxin Electronic Technology Co., Ltd.
 

Main Products:
Induction Heater

Induction heating control board
Induction water heater
Induction hot blast stove
Induction heater coil
Induction Steam Generator
Cabinet type induction heater
 

The key to choosing an inductionheater depends on these four points

1,Specialization: DSP high-speed operation control, digital programmable technology, high-speed optocoupler drive, open hardware architecture

2,Stable performance: The half-bridge IGBT module is used as the main circuit structure, which can save power by 30% ~ 80%, and the thermal efficiency can reach 95%, which can be customized:

3,Worry-free after-sale: one year warranty, professional technical staff guidance, lifetime cost maintenance of wearing parts, after-sales customer service one-to-one tracking service:

4,Quality assurance: 15 years of careful development, EU CE certification, ISO9001 quality management certification
 

Product Description

80kW electromagnetic heating controller is specially designed for the application of pipeline heating and plane heating equipment, such as plastic machinery, food machinery, aluminum plastic machine, roller equipment, heating, boiler, oil and natural gas transmission, etc. With stronger industry pertinence and better energy-saving effect, this product adopts the fifth generation DSP digital processing platform technology of our company, open application structure, wide inductance to adapt to the coil range, through the digital programmable control system, it can realize the special functions of different customers and different occasions, which brings great convenience to customers. It is an electromagnetic heating transformation project and supporting heating equipment Products.

Name	Performance parameter
rated power	Three-phase 80KW
Rated input current	110-120(A)
Rated output current	180-200(A)
Rated voltage frequency	AC 380V/50Hz
Voltage adaptation range	constant power output at 300 ~ 400V
Adapt to ambient temperature	-20ºC~50ºC
Adapt to environmental humidity	≤95%
Power adjustment range	20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 80KW)
Heat conversion efficiency	≥95%
Effective power	≥98%(Can be customized according to user needs)
working frequency	5~40KHz
Main circuit structure	Full bridge series resonance
Control System	DSP-based high-speed automatic phase-locking tracking control system
Application mode	Open application platform
monitor	Programmable digital display
start time	<1S
Instantaneous overcurrent protection time	≤2US
Power overload protection	130% instantaneous protection
Soft start mode	Fully electrically isolated soft start heating / stop mode
RS485 communication	Modbus RTU standard communication protocol
Support PID adjustment power	Identify 0-5V input voltage
Support 0 ~ 1000 ºC load temperature detection	Accuracy up to ± 1 ºC
Adaptive coil parameters	50 square line, length 50m, inductance 110 ~ 120uH
Coil to load distance(Thermal insulation thickness)	20-25mm for circle, 15-20mm for plane, 10-15mm for ellipse and within 10 mm for super ellipse

Detailed Photos

 

industrial use Electromagnetic Induction Heater with Good Stability, Plastic Granulation Induction Heater

1,Connect the power supply voltage of the cooling fan, but connect the 220V power when the fan is 220V, and connect the 380V power when the fan is 380V
2,Connected with cooling fan 220V / 380V (depending on the user, generally 380V)
3,When the external cooling fan is DC 24V, this interface is a switch that controls the 24V fan to work or stop. The two ends of the interface are actually the normally closed contact points of the relay output on the motherboard.
4,Dual AC 24V power supply (choose 4 or 5 when making half bridge)
5,Dual AC 24V power supply (choose 4 or 5 when making half bridge)
6,Single AC 16V power supply
7,Power indicator (red)
8,Work indicator light, flashing during standby, and always on (green) during work
9,External indicator light, led to the LED interface outside the chassis
10,The soft start interface is connected to the R / s interface outside the chassis (can be set to open or close work through F-20, factory default close work, open stop status
11,Finely adjust the power potentiometer. When there is a large deviation in power, this potentiometer can be adjusted appropriately.
12,32-bit high-speed DSP processor
13,Externally connected programmable operating display
14,Isolated RS485 communication interface
15,External load temperature detection interface 1, with accuracy of ± 1 ° C (maximum 150 ° C) single channel, default 1 is used to measure external working temperature
16,External load temperature detection interface 2, with accuracy of ± 1 ° C (maximum 150 ° C)
17,Multi-function input interface (set by F-20)
(1)10K input for external connection potentiometer, can adjust the power range from 20% to 100%
(2)Externally connected PID input (0 ~ 5V) input
Do infrared thermometer or thermocouple conversion voltage 0 ~ 5V input to achieve the display temperature and control power size (up to 1000ºC can be measured and displayed)
18,Connect the high-frequency Mutual inductor and pay attention to the direction. If the direction is reversed, the power is very small
19,IGBT module drive (when doing half bridge, choose 19, 20 or 23, 24)
20,IGBT module drive (when doing half bridge, choose 19, 20 or 23, 24)
21,Connected to high voltage DC bus
22,IGBT temperature sensor interface
23,IGBT module drive (when doing half bridge, choose 19, 20 or 23, 24)
24,IGBT module drive (when doing half bridge, choose 19, 20 or 23, 24)
25,Connected to high voltage DC bus
26,RS485 communication interface, connect A ,B
27,Externally connected K-type thermocouple
28,Externally connected 12V relay drives other required loads, synchronized with the fan start / stop of the machine

FAQ

Q: Where is your factory?

A: Located in foshan city ,China.

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 10 days if the goods are in stock. or it is 40 days if the goods are not in stock, it is according to quantity.

Q: What is your terms of payment ?
A: Payment:30% T/T in advance ,Pay in full before shipment.

Q: Can I do customized design? Such as prting logo, change color, material, size, structure and shape etc...?
A: Yes, both OEM and ODM serivce are offered.  can be done as your request. Pls contact us for more detais.

Q:What other products does the company have?
A:Electromagnetic heater, electromagnetic steam generator, Electromagnetic hot blast furnace

Why Choose us?

1,The world famous brand Infineon IGBT inverter module is used to ensure the stability of the product.

2,High-speed DSP phase-shifting algorithm is used, and each output cycle is precisely calculated to achieve the optimal energy saving purpose.
 3,Magnetically isolated drive technology solves the interference problem caused by optical drive.
4,strong environmental adaptability, can be used in harsh environments;
5, The system control power supply adopts multi-level EMI suppression to ensure the best quality power supply under harsh power supply conditions.
6, strong anti-interference ability, up to more than 50MW combination of parallel work and reliable operation.
7. Coil to ground protection function. When the coil is broken or the coil is shorted to ground, it can effectively protect the whole system and ensure safe use.
8. It can be customized by water cooling and air cooling, and the cooling fan is high-speed dc fan to protect the controller cooling system
9. The incoming and outgoing wires of the power supply use copper bar structure and pure copper high-current terminals to ensure that the copper bars and terminals do not generate heat when they are overworked.